Clean the Fitness Hub
Purpose
EGYM recommends cleaning the Fitness Hub weekly or as needed.
Details
EGYM recommends specific cleaning products from DR. SCHNELL GmbH (www.dr-schnell.com) and STRAUSS (www.strauss.com). If these products are not available in your region, use a comparable product.
Product | Supplier | Surface |
|---|---|---|
FOROL | DR. SCHNELL | Display, camera, metal surfaces |
Plastic Cleaner #7 | STRAUSS | Plastic surfaces |
FLOORTOP | DR. SCHNELL | Rubber feet |
NOVO PEN-OFF | DR. SCHNELL | Textile covering |
Solution
Remove dust buildup below the camera
Nota
Remove dust buildup below the camera before cleaning the Fitness Hub camera and textile covering.
Check the front of the Fitness Hub below the camera for dust buildup.
Remove dust with a dry microfiber cloth, by gently tapping or wiping the area.
Clean the Fitness Hub display, camera, and metal surfaces
Turn off the Fitness Hub.
Enche um pulverizador manual FOROL com 600 ml de água fria e enrosca o cartucho FOROL.
Pulveriza a solução sobre um pano macio.
Cuidado
Do not apply cleaning products directly to the display or camera, and make sure the display and camera are dry after cleaning.
Wipe the display, camera, textile covering, metal surfaces, and plastic surfaces.
Seca todas as superfícies com um pano limpo.
Limpa as superfícies de plástico
Desliga a máquina.
Pulveriza o Plastic Cleaner #7 sobre um pano limpo.
Limpa as superfícies de plástico da máquina.
Limpa os pés de borracha
Desliga a máquina.
Dilui o produto de limpeza FLOORTOP de acordo com as instruções do fabricante.
Limpa os pés de borracha com a solução FLOORTOP.
Seca os pés de borracha com um pano limpo.
Limpa marcas visíveis ou acumulações no revestimento têxtil
Desliga a máquina.
Pulveriza o NOVO PEN-OFF sobre um pano de microfibra seco e limpa a zona afetada do revestimento têxtil.
Cuidado
Para evitar danos, usa sempre um pano de microfibra para limpar o revestimento têxtil.
Seca completamente o revestimento têxtil com um pano limpo.