Skip to main content

Get started

Smart flex onboarding

Smart Flex machine settings can be configured using:

Uwaga

The LEDs flash purple when the settings need to be reviewed.

The LEDs also flash purple on Smart Flex Split and Glutes when trainer instruction is required, even though these machines do not require setting configuration.

  • smart onboarding with Fitness Hub

  • manual onboarding on each Smart Flex machine

  • AutoStart in the Trainer App

After onboarding, members can adjust machine settings by scanning their login medium twice when logging into the machine.

Smart onboarding with Fitness Hub

Smart Flex machine settings are generated using a height and weight measurement from the Fitness Hub.

  • With EGYM Mode on: Members can log on to the Smart Flex machines directly. The machines move to the start position, and the member can start exercising.

  • With EGYM Mode off: Trainers must still review and confirm the machine settings before members start exercising.

Uwaga

If the Smart Flex machine settings are manually configured before smart onboarding with Fitness Hub, those settings will not be updated.

Manual onboarding

  1. Ask the member to log on to the machine.

  2. Log on to the same machine as a trainer.

  3. Use the control panel to adjust the machine for the member.

    • Use the up and down arrow buttons to adjust the vertical mechanisms.

    • Use the left and right arrow buttons to adjust the horizontal mechanisms.

  4. When onboarding several members, you can quickly log out by pressing two opposing at the same time, such as the left and right arrow buttons. The machine lights flash white to confirm logout.