Define machine locations
Machine weights may vary by ± 5kg depending on configuration.
Caution
An additional 60 cm of space is required to allow access to each machine. This space can be shared between machines.
Fitness Hub
EGYM Fitness Hub
Connected body composition scale
Designated standing area
Note
Fitness Hubs with the Microsoft Kinect (horizontal) camera need 20 cm extra space between the camera and the standing area.
Fitness Hub seca edition
EGYM Fitness Hub seca edition
Designated standing area
For a full set of rules related to machine space requirements, refer to Machine space requirements.
 M1 Leg Extension |  M2 Abdominal Crunch |
 M3 Back Extension |  M4 Leg Curl |
 M5 Chest Press |  M6 Seated Row |
 M7 Lat Pull |  M8 Gluteus |
 M9 Leg Press |  M10 Abductor |
 M11 Adductor |  M12 Rotary Torso |
 M13 Butterfly |  M14 Butterfly Reverse |
 M15 Bicep Curl |  M16 Calf Press |
 M17 Shoulder Press |  M18 Triceps |
 M19 Hip Thrust |  M20 Squat |
Smart Flex Split
Smart Flex Hip
Smart Flex Chest
Smart Flex Neck
Smart Flex Quads
Smart Flex Calf
Smart Flex Lat Flex
Smart Flex Glutes
Note
If you need to move the machine to a different location, contact EGYM Support.
Do
Ensure a minimum ceiling height of 3 m (9 ft 10 in) at the installation location.
Place the machine on firm, stable ground.
Face the screen towards a wall for user privacy.
Don't
Do not expose the screen to direct sunlight.
Do not point lights into the camera.
Do not face the screen towards reflective surfaces.
Do not place the machine near equipment that causes strong vibrations.
Do not place the machine near heat sources.
Do not install the machine in areas with high humidity.
Note
If you need to move the machine to a different location, contact EGYM Support.
Do
Place the machine on firm, stable ground.
Don't
Do not place the machines near equipment that causes strong vibrations.
Do not place the machines near heat sources.
Do not install the machines in areas with high humidity.