Smart Flex LED signals
Purpose
EGYM Smart Flex machines use light and vibration signals to indicate when to exercise and rest. Refer to Wie funktioniert Smart Flex? for more information.
Outside of normal exercise, the light colors indicate the machine status and when action is required.
Details
The machine is starting up or adjusting to member settings.
Action: Wait until the light changes to a different color.
The member has logged on. The system is checking whether the member has an account or machine settings.
Action: Wait until the light changes to a different color.
The mechanism is partially blocked. This can happen if a member steps onto the machine before calibration is complete or if an object is blocking the mechanism. Keep clear of the machine during calibration and adjustment.
Action: Check for any obvious obstructions, such as free weights or clothing on the machine.
Login failed, or a blockage cannot be resolved.
Action:
Log in again.
If needed, restart the machine.
If the issue continues or occurs regularly, contact EGYM Support.
No Internet or LAN access is available.
Action:
Check that the LAN cable is connected.
Check that the Wi-Fi router is functioning.
If needed, restart the machine.
If the issue occurs regularly, contact EGYM Support.
The member RFID tag is not linked to an EGYM account.
Action: Onboard the member.
The Smart Flex machine has no saved settings for the member account; the member needs instructions to use the machine.
Action: Onboard the member on the Smart Flex machine.
A software update is in progress.
Action: Wait until the update is complete.
Achtung
Do not switch off the machine. The update should take less than 30 minutes.