Skip to main content

Clean Smart Strength machines

Purpose

EGYM recommends cleaning Smart Strength machines weekly or as needed.

Details

EGYM recommends specific cleaning products from DR. SCHNELL GmbH (www.dr-schnell.com) and STRAUSS (www.strauss.com). If these products are not available in your region, use a comparable product.

Product

Supplier

Surface

FOROL

DR. SCHNELL

Pads, rubber grips, display, metal surfaces

Plastic Cleaner #7

STRAUSS

Plastic surfaces

NOVO PEN-OFF

DR. SCHNELL

Textile covering, pads

FLOORTOP

DR. SCHNELL

Rubber feet

Solution

Clean the machine pads, rubber grips, display, and metal surfaces

  1. Turn off the machine.

  2. Fill a FOROL hand sprayer with 600 ml of cold water, and screw in the FOROL cartridge.

  3. Spray the solution onto a soft cloth.

  4. Wipe the pads, rubber grips, display, and metal surfaces.

  5. Wipe all surfaces dry with a clean cloth.

Clean plastic surfaces

  1. Turn off the machine.

  2. Spray the Plastic Cleaner #7 on a clean cloth.

  3. Wipe the plastic surfaces of the machine.

Clean visible marks or buildup on the pads

  1. Turn off the machine.

  2. Spray NOVO PEN-OFF onto a soft, dry cloth and work it into the affected area.

  3. Wipe the area with a clean, damp cloth using water only.

Clean visible marks or buildup on the textile covering

  1. Turn off the machine.

  2. Spray NOVO PEN-OFF onto a dry microfiber cloth and wipe the affected area of the textile covering.

    Attention

    To prevent damage, always use a microfiber cloth to clean the textile covering.

  3. Dry the textile covering completely with a clean cloth.

Clean the rubber feet

  1. Turn off the machine.

  2. Dilute the FLOORTOP cleaner according to the manufacturer instructions.

  3. Clean the rubber feet with the FLOORTOP solution.

  4. Wipe the rubber feet dry with a clean cloth.